|
Package 1: (500W)
1x500W Solar Panel
1x30A Controller(for free)
Package 2: (1000W)
2x500W Solar Panel
1x30A Controller(for free)
Package 3: (10A/20A/30A/40A/50A/60A/80A/100A Set)
1x 500W Solar Panel
1x 10A/20A/30A/40A/50A/60A/80A/100A Controller
1x 3000W Power Inverter
1x Cigarette Lighter Line
2x Clips
Package 4: (Power Inverter)
1x 3000W Power Inverter
1x Cigarette Lighter Line
2x Clips
Solar Panel
Features:
– High cell efficiency with quality silicon materials for long term output stability and reliability.
– Strictly quality control ensure the stability and reliability, totally 23 testing procedure to do quality control.
– High transmittance low iron tempered glass with enhanced stiffness and impact resistance.
– Solar Panel leads for easy plug and play use.
Specifications:
Color: Black
Layer material: ETFE
Input voltage: DC18V
Power: 500W
Size: as the picture
Usage: solar energy is converted into electricity
Scope of application: universal
Notes:
1. Do not extrude with sharps objects.
2. USB can't enter water.
Power Inverter
Features:
-Intelligent dual digital display
-Pure sine wave inverter has low interference to precision equipment, low noise and strong load adaptability
-With over temperature protection, input high and low temperature protection, overload protection, short circuit protection, etc.
-High conversion rate, reduced conversion loss, continuous voltage.
-Intelligent temperature control silent fan, the fan will automatically start when the inverter starts.
Specification:
Material: Aluminum Aalloy Casing
Color: Red
Size: 7.5*4.3*2.0 inch
Enter Voltage: 12V
Output Voltage: 220V
Power: 3000W
Frequency: 50Hz
Inverter Efficiency: 85%
Output Waveform: Pure Sine Wave
Number of Socket: One
Note:
1.Do not reverse the battery connectors
2.Do not use by under 18 years old people
3.Do not use it in the place where has water
Controller
Features:
1.Build-in industrial micro controller.
2.Fully 4-stage PWM charge management.
3.One-key setting,digital display, auto memory function.
4.Dual mosfet Reverse current protections, low heat productions.
5.Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
Specifications:
Model: PWM
Buck charge: 28.8V
Float charge: 27.4V
USB output: 5V/3A
Self-consume: <10mA
Discharge stop: 21.4V
Voltage: DC 12V/24V
Max solar input: <50V
Current: 10A/20A/30A/40A/50A/60A/80A/100A
Rated working current: ≤20A
Discharge reconnect: 25.2V
Working temperature: -35℃~60℃
Output voltage: 12V/24V Automatically distinguish voltage
Safety Instructions:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Note:
Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
|
